Laticrete Grout
Home Up Contents Search Feedback

Laticrete® Grouts & Sealants and Latapoxy® Grouts
PRODUCT DESCRIPTIONS / ADVANTAGES / RECOMMENDED FOR / Coverage Charts

PLEASE NOTE:
* Masterpiece Group IV Colors available in LATAPOXY® SP-100 Stainless Epoxy Grout 1/4 Unit Only.
**Available in LATICRETE Tri-Poly Fortified Wide Joint Grout (2500 Series)
 
IMPORTANT NOTES
*Grout samples are approximate guides only. Actual shade and texture will depend on jobsite conditions, beyond manufacturers control. 
*Verify actual appearance and compatibility with a test area before main installation commences.
*Follow ANSI #108.10, MMSA Bulletin #9 practices and use grouts with the same batch number.

These charts show available colors for the following grouts:

LATICRETE Floor Grout and Joint Filler (Sanded) - 500 Series
LATICRETE Wall Grout (Unsanded) -600 Series
LATAPOXY SP-100 Stainless Epoxy Grout - 700 Series (Interior use only)
¬LATICRETE Flexible Sealants (800 Series) are available in these colors as well as 800 Clear.
LATICRETE 524 and 624 Grey are naturally colored (unpigmented) and may differ from chart depending on manufacturing location
* Spec-L Grout
Available in SP-100 Latapoxy ONLY
For Ceramic Tile, Quarry Tile, Pavers, Brick and Stone.
High Fashion Meets High Performance.
New LATAPOXY Spec-L Grout, the first and only multi-color grout, offers a range of non-fading designer blends to complement virtually any tile decor.
It's stainless and super-tough, with color consistency you can count on.
Spec-L Grout is ideal for demanding commercial and high fashion residential applications ... and whenever design is as important as performance.
LIMITATIONS: Not for exterior use. May scratch soft marble and delicate glazed tiles. Test small area before use.
NOTE: Colors indicated are as close as possible as printing will permit. Actual colors of Spec-L Grout may vary slightly from printed samples. For critical color
match applications, use of actual product samples is recommended.

*NOTE: Colors indicated are as close as possible as printing will permit. Actual colors of Spec-L Grout may vary slightly from printed samples. For critical color match applications, use of actual product samples is recommended.
**Important Notes:

Color samples are printed reproductions and should only be used as approximate guides to appearance. Actual shade and texture will depend on jobsite conditions, installation techniques, tile characteristics and other factors beyond grout/sealant manufacturer's control. Verify appearance with a test area before main installation commences.
For maximum uniformity in color/appearance, follow ANSI A108.10-1985/MMSA Bulletin No. 9 grouting practices. Also, use grouts with the same lot/batch number.
Samples depict 500 and 600 series grouts fortified with LATICRETE* 1776 Grout Admix Plus. Mixing with other additives or water will cause color variations.
Some tile, pavers or stone may be stained by color pigments in grouts. Verify compatibility with a test area before grouting entire installation.
See also:
Coverage Charts for:
LATICRETE Floor Grout
LATAPOXY SP-100 Stainless Epoxy
LATICRETE Dry-Set Wall Grout

Laticrete International is the world leader in ceramic tile and natural stone installation materials. Our grouts (epoxy, sanded and unsanded) and sealants are available in an array of colors which are sure to enhance the beauty and durability of any ceramic tile, paver or stone installation.
PRODUCT DESCRIPTIONS
LATAPOXY SP-100-
The ultimate 100% solids epoxy grout. Stainless, sanitary, and colorfast. Uniform color and highly chemical resistant. Exceeds ANSI A118.3 - 1985. For use with all wall and floor type tiles.
LATICRETE Floor Grout and Joint Filler (sanded)- Preblended cement, sand and colorfast additives. Mix with LATICRETE Dry-Set Wall Grout (Unsanded)- A cement based grout designed for use with absorbent tiles. Mix with 1776 Grout Admix Plus.
LATICRETE Flexible Sealant- A high performance caulk and sealant for home and professional use.
ADVANTAGES:

READY TO USE
NON-SHRINKING
WEATHER RESISTANT
STAIN & SOIL RESISTANT
EASY MAINTENANCE
UNIFORM COLOR
SHOCK & VIBRATION RESISTANT

RECOMMENDED FOR:

QUARRY TILE
CERAMICS
MOSAICS
SLATE
MONOCOTTURA TILE
FLOOR BRICK
PAVERS
STONE

LATICRETE INTERNATIONAL INC.
1 LATICRETE Park North - Bethany, CT - USA Phone: (203) 393-001 0 -Fax: (203)393-1684

Laticrete Floor Grout

Tile Joint Widths In Inches
Sizes 1/8 1/4 3/8 1/2
1x1x1/4 55 - - -
2x2x1/4 30 - - -
3x3x1/4 21 39 55 70
4x4x1/4 16 30 43 55
4x4x1/2 - 60 86 110
6x6x3/8 - 31 45 58
6x6x1/2 - 41 60 78
4x8x3/8 - 35 50 64
4x8x1/2 - 46 67 86
4x8x1 3/8 - 125 183 240
8x8x3/8 12 24 35 45
8x8x1/2 - 31 46 60
9x9x3/4 - 42 62 81
10x10x3/8 - 20 28 37
12x12x3/8 - 16 24 31

LATAPOXY SP-100 Stainless Epoxy Coverage Chart:
(Square foot coverage per #1 unit)

Tile Joint Widths In Inches
Sizes 1/16 1/8 1/4 3/8
1x1x1/4 40 20 10 5
2x2x1/4 75 40 20 15
4x4x1/2 75 40 20 10
4 1/4x4 1/4x1/4 90 45 40 30
4x8x1/2 100 50 25 15
4x8x1 3/8 35 15 5 4
6x6x3/8 150 75 40 25
6x6x1/2 110 55 30 20
8x8x3/8 200 100 50 35
8x8x1/2 180 90 45 32
12x12x3/8 305 150 75 50

LATICRETE Dry-Set Wall Grout Coverage Chart:
(Pounds of grout needed per 100 square feet)

Tile Joint Widths In Inches
Sizes 1/16 1/8
4 1/4x4 1/4x5/16 10 15
6x6x5/16 5 10
12x12x1/2 4 8

 

Contact the Webmaster    PRODUCTS DESIGN CONTACT US

...Your on-line source
© 1998-2001 TVS® All rights reserved. Last modified: 09/16/01