Keystones

keystones^™

In a wide variety of colors ranging from earth tones to brights, Keystones ceramic mosaics borrow nature's beauty as well as its strength. Keystones will resist frost, weathering, staining and fading, and are virtually waterproof. Inorganic stains are precisely blended with procelain raw materials and kiln-fired to create Keystones' distinctive look.

Sizes:

2" x 2" Mosaic Field Tile (Nominal 5.1cm x 5.1cm) Pieces per carton: 12	1" x 1" Mosaic Field Tile (Nominal 2.5cm x 2.5cm) Pieces per carton: 12	1" x 1" Hexagon Mosaic Field Tile (Nominal 11-1/4" x 22-1/4") (Nominal 28.6cm x 64.1cm) Pieces per carton: 12 Sq. ft. per carton: 21
Tile Thickness: 1/4"
Recommended Grout Joint: 1/16"

Application:

	Residential	Light Commercial	Commercial

Floors	X	X	X

Walls	X	X	X

Counters	X	X	X

Pool Lining	X	X	X

Shade Variation:

Test Results:

	ASTM#		Result

Water Absorption	C373		<0.5%

Break Strength	C648		>364lbs

Chemical Resistance	C650		Resistant

Coefficient of Friction (Wet)	C1028	Non-abrasive	≥0.60
	C1028	Abrasive	≥0.80

Coefficient of Friction (Dry)	C1028	Non-abrasive	≥0.60
	C1028	Abrasive	≥0.70

Abrasion Resistance	ISO 10545-7		Heavy Commercial

Bond Strength	C482		>65 psi

Trim:

CB-812 " x " Inside Angle	CB-813 " x " Inside Angle	CK-812 " x " Inside Angle	CK-813 " x " Inside Angle
CC-812 " x " Round Outside Angle	SB-816 " x " Round Outside Angle	SC-813 " x " Round Outside Angle	SC-816 " x " Round Outside Angle
SC-862 " x " Round Outside Angle	SC-886 " x " Round Outside Angle	SCR-L-833 1" x 2" Round Outside Angle	MB-5 1" x 1" Round Top Base
MB-5B 2" x 2" Round Top Base	MB-4C 1" x 1" Square Top Base	MB-5A 2" x 2" Square Top Base	C-813 " x 1" Stretcher
C-833 " x 2" Stretcher	S-812 " x 1" Stretcher	S-832 " x 2" Stretcher	S-862 " x 1" Stretcher Clearglaze available
S-886 " x 2" Stretcher Clearglaze available	C-701 1" x 2" Swimming Pool Nosing	SCR-L-701 " x " Swimming Pool Nosing	Thinset bed 1" x 1" Thinset bed

Complies with A.D.A. recommendations for accessible routes. Not for use on ramps when ordered without abrasive content. Manufactured in accordance with ANSI A137.1 standards.

Also recommended for exterior walls and floors in any climate, as well as swimming pool linings and decking where proper installation methods are followed.

Please read important product information.

Contact the Webmaster PRODUCTS DESIGN CONTACT US