French Quarter

french quarter^®

If you're looking for the beauty of antique slate combined with the performance of ceramic tile, welcome to French Quarter . Color variation and a unique slate-textured surface give the tile a natural look that brings the character and timelessness of New Orleans' French Quarter into any interior setting.

Sizes:

12" x 18" Floor Field Tile (Nominal 11-13/16" x 17-7/8") (Nominal 30cm x 45.4cm) Pieces per carton: 12 Sq. ft. per carton: 18	12" x 12" Floor Field Tile (Nominal 11-13/16" x 11-13/16") (Nominal 30cm x 30cm) Pieces per carton: 11 Sq. ft. per carton: 11	12" x 12" Hexagon Floor Field Tile (Nominal 11-13/16" x 11-13/16") (Nominal 30cm x 30cm) Pieces per carton: 11 Sq. ft. per carton: 10.3	6" x 12" Floor Field Tile (Nominal 5-13/16" x 11-13/16") (Nominal 14.8cm x 30cm) Pieces per carton: 22 Sq. ft. per carton: 11
6" x 6" Floor Field Tile (Nominal 5-13/16" x 5-13/16") (Nominal 14.8cm x 14.8cm) Pieces per carton: 44 Sq. ft. per carton: 11	4" x 4" Floor Field Tile (Nominal 3-3/4" x 3-3/4") (Nominal 9.5cm x 9.5cm) Pieces per carton: 54
Tile Thickness: 5/16"
Recommended Grout Joint: 1/4"

Application:

	Residential	Light Commercial	Commercial

Floors	X	X	X

Walls	X	X	X

Counters	X	X	X

Pool Lining	X	X	X

Shade Variation:

Design Ideas:

Alternating

Hexagon with Dot

Hexagon

Windmill

Test Results:

	ASTM#	Result

Water Absorption	C373	<3.0%

Break Strength	C648	>250 lbs

Scratch Hardness	MOH's	9

Chemical Resistance	C650	Resistant

Coefficient of Friction (Wet)	C1028	≥0.60

Coefficient of Friction (Dry)	C1028	≥0.80

Abrasion Resistance	ISO 10545-7	Heavy Commercial

Trim:

There are no trim options available.

Use two 12" x 12" Hexagon field tiles for each 4" x 4" Dot

Suitable for pool linings in non-freezing climates only.

Not recommended for floor areas subject to standing water or grease accumulation. Suitable for exterior walls in non-freezing climates when proper installation methods are followed.

Complies with A.D.A. recommendations for accessible routes. Not for use on ramps. Manufactured in accordance with ANSI A137.1 standards.

Please read important product information.

Contact the Webmaster PRODUCTS DESIGN CONTACT US